Liberty 05 Lateral Raise
The design of the Liberty Series Lateral Raise allows exercisers to easily adjust the seat height from a seated position to ensure shoulders are properly aligned with the pivot points. The upright, open design makes the Lateral Raise easy to enter and exit.
Equipment Dimensions and Weight
|Weight Stack||Each selector plate is entirely precision-machined on all surfaces. Top plate has replaceable precision self-lubricating bushings.
The plates feature a black painted protective finish. Guide rods are precision centerless ground, polished, with corrosion-resistant plating for smooth operation and rust retardation.
The weight stack is elevated to facilitate user pin selection from seated position.
|Upholstery||Premium-quality urethane molded-foam padding for maximum comfort. Automotive-grade, two-textured fabric features double top stitching on all seams.|
|Adjustable Seat||Yes, assisted ratcheting seat adjustment|
|Adjustments||Ratcheting seat adjustments require only a lift to release the lever. Handles include slip-resistant rubber sleeves with machined alloy end-caps. Adjustment points are highlighted with a contrasting color for ease-of-use.|
|Instructional Placard||Easy to understand exercise placards feature large set-up and start and finish position diagrams that are visibly easy to identify.|
|Bearings and Pivot Points||Oversized, linear, re-circulating ball bearings run on case-hardened shafts and are sealed and self aligning. Pivot points and joints feature motor-grade sealed ball bearings, or sleeve bearings, utilizing either oil-impregnated bronze bushings or pre-lubricated nylon bushings. Bolts are grade 5 or above in all applications.|
|Water Bottle and Accessories Holder||The drink-and-accessory holder features large open, even surfaced area, easily accessible and easy to keep clean.|
|Pulleys and Cables||Glass-fiber-reinforced nylon pulleys provide strength and durability, while precision ball bearings allow effortless rotation. Cables use a 7x19 stranded wire configuration for added strength and flexibility and are coated with black pressure-extruded nylon for long lasting protection and a smooth feel. 3/16-inch (.48 cm) wire is coated to 1/4 inch (.64 cm) with a breaking strength of 4200 lb (1905 kg) and 1/8 inch (.32 cm) wire is coated to 3/16 inch (.48 cm) with a breaking strength of 2000 lb (907 kg).|
|Frame and Finish||The frame is 11 gauge (.120 in) 2x4" electro weld steel racetrack tubing. Movement arms are made of electro weld steel round tubing. The five-stage material prep/wash process is followed by an electrostatically applied, heat-cured powder coat.|
|Bolt Down Capability||Yes|
|General Features||Gas-assisted seat and inward-facing orientation helps user easily align shoulder joint to pivot. Padded arm pads and fixed handles allow for easy user positioning.|